Last call.
Pro chain at closeout prices.
We're clearing warehouse shelves and passing it along: 100-foot WoodlandPRO reels, ripping and carving chain, and a few odd lots. No restocks on any of it — when a SKU sells out, it drops off this page.
- Up to
- 93% off
- Items
- 16
- Restocks
- None
Clogger Ropeguard Chainsaw Rope Sleeve
Kevlar-blend sleeve that keeps a running saw off your basal anchor or positioning lanyard. Smooth nylon liner so rope still glides.
01 · Chain Reels
100' Cutting Chain Reels
A hundred feet of WoodlandPRO chain is roughly twenty-two 20-inch loops. Spin your own and stop paying loop prices — these reels are moving out at well over half off.
4 of 4 still available
Pro Pick60% OFF33RC Full Chisel Reel
SKU WP100R 33RC
Our fastest-cutting 3/8" full-comp chisel for clean wood. The everyday reel for 50–100cc saws running 16"–36" bars.
- 3/8" pitch
- .063" gauge
- Chisel
- 1,640 DL
Replaces Stihl 36RS / 36RSC · Oregon 75LGX / 75LPX / 75EXL
59% OFF36RCS Skip Chisel Reel
SKU WP100R 36RCS
Full-skip chisel for 24"–42" bars. Fewer cutters means less drag and better chip clearance on big wood.
- 3/8" pitch
- .063" gauge
- Skip Chisel
- 1,640 DL
Replaces Stihl 36RSF · Oregon 75JGX / 75JPX / 75EXJ
60% OFF38SC Semi-Chisel Reel
SKU WP100R 38SC
Semi-chisel holds an edge in dirty, frozen, or abrasive cutting. The all-around reel for firewood and storm cleanup.
- 3/8" pitch
- .058" gauge
- Semi-Chisel
- 1,640 DL
60% OFF63RC Low-Profile Chisel Reel
SKU WP100R 63RC
Fast-cutting picco chisel for top-handle and small-displacement saws. The arborist crew reel — 10"–18" bars, up to 42cc.
- 3/8" LP pitch
- .050" gauge
- Chisel
- 1,640 DL
Replaces Stihl 63PS
02 · Ripping Chain
Ripping & Milling Chain Reels
Ground to cut with the grain for a smooth slab face off an Alaskan mill, Logosol, or Lucas. Match the pitch and gauge to your bar and pick the reel.
5 of 5 still available
38RP Ripping Reel
Biggest SavingsSKU WP100R 38RP
For 3/8" .058" bars — the deepest discount in the ripping lineup.
- 3/8" pitch
- .058" gauge
- Ripping
- 1,640 DL
$155.59$388.9960% off · save $233.40
46RPS Hyper-Skip Ripping Reel
SKU WP100R 46RPS
Hyper-skip sequence built for Lucas and Peterson swing-blade slabbers. Extra chip clearance on super-wide cuts.
- .404" pitch
- .063" gauge
- Hyper-Skip Ripping
- 1,484 DL
$103.19$257.9960% off · save $154.80
30RP Ripping Reel
SKU WP100R 30RP
For 3/8" .050" bars — the most common Alaskan-mill setup on mid-size saws.
- 3/8" pitch
- .050" gauge
- Ripping
- 1,640 DL
$299.99$388.9923% off · save $89.00
33RP Ripping Reel
SKU WP100R 33RP
For 3/8" .063" bars — the big-saw milling standard on Stihl and Husqvarna.
- 3/8" pitch
- .063" gauge
- Ripping
- 1,640 DL
$299.99$388.9923% off · save $89.00
63RP Low-Profile Ripping Reel
SKU WP100R 63RP
Low-profile semi-chisel ripping for small saws and Logosol mills. Thin kerf, less waste per slab.
- 3/8" LP pitch
- .050" gauge
- Ripping
- 1,640 DL
$195.99Clearance price
03 · Carving Chain
Carving & Narrow-Kerf Chain
1/4" pitch chain for dime-tip carving bars, pole pruners, and battery saws. No guard links, so it bores and detail-cuts without fighting you.
2 of 2 still available
Biggest Savings60% OFF13SC Carving Chain Reel
SKU WP100R 13SC
Smooth-cutting 1/4" semi-chisel in .050" gauge. Aggressive enough to rough out a stump, fine enough for feathers and fur on a dime tip.
- 1/4" pitch
- .050" gauge
- Semi-Chisel
- 2,400 DL
Up to 16" bars · saws up to 42cc
44% OFF71SC Narrow-Kerf Reel
SKU WP100R 71SC
.043" narrow kerf takes a thinner bite, so battery saws and pole pruners keep their speed. Also a favorite carving chain.
- 1/4" pitch
- .043" gauge
- Narrow Kerf
- 2,400 DL
Replaces Stihl 71PM3
04 · Odds & Ends
Loops, By-the-Foot & Supplies
Odd lots we want off the shelf. A 32" skip loop, 33RCS sold by the drive link so you order exactly what your bar needs, a case of marking paint, and a 125dB safety whistle.
4 of 4 still available
Clearance32" 33RCS Skip Chisel Loop
SKU WPL 33RCS105
Ready-made 105-link full-skip loop for a 32" bar. Same chain as the 36RCS reel above, cut and spun.
- 32" bar
- 3/8" pitch
- .063" gauge
- 105 DL
Replaces Stihl 36RSF · Oregon 75JGX
Bulk BuyClearance33RCS Chain by the Drive Link
SKU WP375 33RCS
Priced per drive link. Enter your bar's DL count as the quantity and we spin the loop — no leftover reel.
- 3/8" pitch
- .063" gauge
- Skip Chisel
- Per DL
Replaces Stihl 36RSF · Oregon 75JGX
60% OFFHighball Tree & Log Marking Paint · Case of 12
SKU 17568 FLG CS
Fluorescent lime green that stays visible through a season of weather. Twelve 13 oz cans, each with distance and close-up nozzles.
- Lime green
- 12 × 13 oz
- Two nozzles per can
43% OFFForester 125dB Safety Whistle
SKU AHL OW125P
Pealess hi-vis whistle that still works soaking wet. High pitch carries up to a mile. Comes with a lanyard, carry case, and two mouthpieces.
- 125 dB
- Pealess
- Hi-vis green
- Lanyard + case
Fit Guide
Match the chain to your bar.
Two numbers decide fit: pitch and gauge. Both are stamped on the bar, usually near the tail by the mount. Find your pair in the table and the chains on this page that run on it are listed beside it.
Buying a reel? Divide your bar's drive-link count into the reel's total to see how many loops you'll get. Not sure? Call 1-800-322-4539 and we'll read the bar for you.
| Pitch | Gauge | Chains on this page | Typical saws |
|---|---|---|---|
| 3/8" | .050" | Mid-size Husqvarna, Echo, and most 50–60cc saws | |
| 3/8" | .058" | Many Husqvarna and Jonsered bars | |
| 3/8" | .063" | Stihl standard on 50cc and up | |
| 3/8" LP | .050" | Top-handle and small saws, Logosol mills | |
| .404" | .063" | Lucas / Peterson swing-blade slabbers | |
| 1/4" | .050" | Carving bars | |
| 1/4" | .043" | Battery saws, pole pruners, carving |
Want a reel spun into loops, or a second opinion on fit?
Our crew has been building chain in Woodland, California since 1975. Call with your bar length and drive-link count and we'll confirm the chain, then get it out the door while the clearance stock lasts.